Made of special PU (Poly Urethane) material, it can quickly restore to its original state without damaging the vehicle and itself in case of a high speed collision.

High reflective heat transfer sheet is posted on specially designed grooves, making it highly visible from distance at night or in bad weather.

Its tensile strength and UV stabilisers enables it to withstand the harsh weather conditions. It is easy to install with epoxy and other strong adhesives without damage to roads or bridges.

Center Lane Dividing for narrow roads

Multi lanes for broad roads

Sharp Curves

At the start of central verge (where single road becomes double road)

Traffic Islands

No stop Zone at T shape road traffic signals

Parking lots

Constructions Zones etc.

The Duraflex Post is designed to protect your work zone under the most demanding conditions. The perfect combinations of durability, visibility and simple installation helps you to save time and money maintaining your lane diversions. Design to meet all conditions, the duraflex post will help to improve your road safety.

Features & Benefits

Superior durability for lower maintenance.

Bright colour and high quality reflective for greater visibility, day and night.

A single pin for easy installation.

Can be glued or bolted.

Unaffected by outdoor temperature variations.

Can withstand impact in excess of 100 Kph.

Made from PU (Polyurethane).

Durakerb

Durakerb giving new ideas/ ways to divide roads, paths due to its light weight, modern and internationally accepted design. It can be installed in minutes.

Features & Benefits

Durakerb & Duraflex post can be attached easily using a single aluminium pin.

Attractive and Internationally accepted design.

End Pieces (Edges) can be attached as and when required.

A cap is provided if Duraflex post attachment is not required.

Available in White, Yellow, Orange, Blue & Black Colours.

Centre Verge

Centre Verge is useful to make dividers to control the traffic.

Manufactured in PE, U.V. stabilised material.

Instant fixing and portability makes it suitable to control traffic.

Spring post (Model AMR 101 & AMR 105 can be easily fixed into the Centre Verge.

Available in White, Yellow, Orange, Blue & Black colours.

Size : Length 740 mm & Width 250 mm Weight 2250 Grams.

Lane Divider is innovative and cost effective concept to divide roads and paths due to its light and durable construction.

Internationally Accepted Design.

Available in White, Yellow, Orange, Blue & Black colours.

T - Top and Loop Top guide posts, also called bollards are excellent visual demarcations which can be used at hospitals, shopping malls, schools, parking lot etc.

These Guide Posts are designed for maximum visibility, quick setup and low maintenance, these delineator posts feature a ‘flare - bottom’ design.

Guide Post bases are made from high quality non fading rubber base. Guide post include two sets of highly reflective tapes.

Features & Benefits

Can be interlinked with plastic chains

Specialised HDPE construction

Includes Reflective Strips

Suitable for indoor and outdoor applications

UV stabilised

Highly effective in road traffic management

Two high performance 100 mm reflectors are positioned above the road surface in order to provide safe and comfortable eye guidance

It has a white reflector in the direction of one lane and a yellow reflector in the direction of opposite lane to provide good visibility.

Posts are used to guide the edges of highways and narrow roads.

Model No : AMR 117

Height : 1400

Weight : 1700

Material : HDPE

Features & Benefits

Reflector of 100 mm dia fitted on both sides.

Bright colour and high quality reflective for greater visibility, day and night

Easy installation

Can be glued or bolted

Unaffected by outdoor temperature variations

UV stabilised

Model No : AMR 118

Height : 800 MM

Weight : 1230 GM

Material : HDPE

Bollards are used to guide the traffic for safe direction. It is generally installed at the crossing, start of the central verge, diversions etc.

Specifications of Bollard

The bollard consists of One Plastic Square Plate, one MS Round Plate and one message plate fitted on 1825 mm MS pipe dia 57 mm duly powder coated.

Plastic Plate Size 385 mm X 385 mm is fitted with nine reflectors made of PMMA of 100 mm dia, welded ultrasonically on Plastic Plate.

MS round plate of 405 mm dia, is fitted below the square plate on the MS pipe with the clamps. HIG grade reflective tape in blue colour is posted on the round plate with directional arrow in white colour.

MS Plate of 305 mm X 75 mm is fitted below the round plate for messages.

A.M.R. Road Fence is extremely robust built. It can be installed in areas like Toll Plazas, Highways, construction zones, school zones, hospitals, malls, colonies etc. It is specifically useful in No U - turn areas and lane separators.

It prevents from jaywalking and improves driver’s visibility as it is on the centre of the road.

Available Colours :

Gray and Orange

It can be installed independently as well as in the row.

Prevent from jaywalking as the gap of panel is narrow.

High visibility with high identity reflective sheets.

Environment friendly design.

Urethane posts and PE bars are highly resilient and endure crash impact.

A.M.R. speed bumps are highly resistent to severe impacts and harsh weather conditions. Its interlocking sub units makes it bind perfectly into a one firm bump.

The pre - coloured material (Black/Yellow) and UV stabiliser keep them perpetually colourful, Studded with reflectors on either side, they are clearly visible to the motorists during night hours. These bumps are ideal for private colonies, hospitals, educational institutes, security check posts, parking areas, loading sites, factory complex or anywhere it is desired to control the speed of moving vehicles.

Installation Procedure :

Clean the surface, mark the nail points, grout the holes and clear the surface again. Apply appropriate epoxy to the 6 nails provided with the bumps.

Portable speed bump is designed to control temporary traffic pattern.

Speed bumps fold up and fit into storage bag (included) when not in use.

High visibility black and yellow design features multiple reflectors for added visibility at night.

The inter locking individual pads allow it to naturally conform to the road surface which reduces stress and increase longevity.

Comes with built in handle for easy placement.

Can be easily transported and stored.

Ideal For : -

School zone safety

Civic activities

Security check point

Street fair

Easy storage and transportation

Rumbler strips, also known as alert strips, wake up calls, growlers and drift lines, are a road safety feature to alert inattentive drivers of potential danger, by causing a tactile vibration and audible rumbling transmitted through the wheels into the vehicle interior. A rumble strip is applied along the direction of travel following an edge line or centreline, to alert drivers when they drift from their lane. Rumble strips may also be installed in a series across the direction of travel, to warn drivers of a stop or slowdown ahead, or of an approaching danger spot.

Anti glare screen /panel/board are installed on the highways where speeds are generally in excess of 70 Km/hr as these block glare.

It comes with special antitheft bolts and is specially designed to block head lights from opposite side. Antiglare screens are crucial in improving highway safety.

Key Features : -

Easy to install

Possible to mount on any guardrails

Reflectors of 100 mm Dia on each sides

Light weight, UV stabilised

High intensity and Anti - corrosion property

Road safety cones meet world-class quality standards. Made up of high quality LDPE (Low Density Poly Ephylene) using UV stabilisers, these cones remain unchanged in colour, in all weather conditions. Their bright hues make them visible from distance.

Fitted with highly reflective sleeve, these cones can be used for traffic monitoring. Quite versatile, these cones are compatible with various types of road safety accessories such as barricade tape, plastic chain, safety light bar, message plates, flags etc.

Provided with inbuilt heavy rubber base at the bottom, these cones remain intact in heavy wind pressure.

Heavy weight rubber base enables it to stand upright in fast winds or traffic.

Triangular Cones meet world class quality standards. Injection moulded from LDPE plastic, using UV stabilised material, these cones can withstand all weather conditions.

Fitted with reflective sleeve, these cones can be used for traffic controlling, construction sites, airports, parking areas etc.

Built in hook can be used for various purposes.

These cones are easily stackable.

These cones are made from blow moulding process with attached rubber base.

It guarantees the quality and stability of colour in all weather conditions because of UV stabilised material.

Model - AMR 136

1600 X 650 X 980 MM

&

Model - AMR 137

1055 X 500 X 800 MM

A.M.R. barricades creates a barrier or obstacle to control, block passage or force the flow of traffic in the desired direction.

Our Barricades are specifically designed for crowd control purpose and are very good alternatives for cemented barrier to use at toll plaza and highways. These can be used at shopping malls, stadiums, airports and anywhere for organising traffic and road safety purposes.

They prevent vehicles from heavy damages during a crash and can be water or sand filled, to improve its stability.

Key Features -

Uses -

UV stabilised for excellent colour stability.

Can be interlocked in long series, curves or any geometric shapes as per requirement.

Sturdy long lasting design

Aesthetically appealing

Shopping Malls, Stadiums, Toll Plazas, Airports, Bus Stands, Hotels, Hospitals etc.

Model - AMR 138

Portable plastic traffic barricades are more effective, safe and stable than drums, posts, cones and other types of temporary barricades.

High visibility alerts drivers to safety hazards ahead.

it can be aligned in a straight or in twisting roads.

Linear design makes a positive visual separation between vehicles, bicycles and pedestrians.

Custom signage and flashers can be easily attached on it.

Model - AMR 139

Weight : 2520 GM

Material : HDPE

Length : 750 MM

&

Model - AMR 140 Plank

Weight : 1800 GM

Material : ABS

Length : 980 MM

Traffic Barricade Application :

Lane delineation, diversion of traffic etc.

Sidewalk detour

Sports, crowd control etc.

Parking lots

Terminals - ferry, freight, airport

Toll booths

Police and other security purpose

Temporary hazards, closures

Angular Joiner

Joiner interlock barricades and stays together securely.

This is used to connect barricades to get desired angle.

This can be used to create a round about by interlocking the barricades.

Straight Joiner

It is used to interlock barricades in straight line.

Model - AMR 141

Weight : 11.00 Kg

Material : HDPE

Height : 1750 MM

Model - AMR 142

Weight : 7500 GM

Height : 1473 MM

Material : HDPE

Water Capacity : 80 L

Model - AMR 143

Weight : 8500 GM

Height : 1220 GM

Material : HDPE

Model - AMR 144

Model - AMR 145 (White)

1030 X 150 X 500 MM

A.M.R. Barricade Connector are made out of special grade (LLDPE) in orange colour by Roto Moulding Process.

Reflectors/ Tape can be fitted on it for better visibility in the night.

Model - AMR 146

Made out of LLDPE material, Size : L : 1200, W : 480 mm (front), 1370 mm (Back), Back Height : 1000 mm, Front Height : 970 mm, Water ballast : 650 ltrs

Delineators are ideally suitable for dangerous curves, central verges, islands etc.

High quality round reflectors fixed on both sides make it highly visible in poor light condition.

They can be installed horizontally as well as vertically.

Due to specially designed body and reflectors fixation method, their reflectivity and durability remain for a long life.

Model No : AMR 147

Two high performance 100 mm dia reflectors and two rectangular reflectors of 70 mm X 23 mm are fixed on both sides of the Guide Post. Reflectors are positioned at the best eye guiding level, so that the drivers can be warned from a safe distance

The body of Guide Post is moulded in ABS plastic and it is fixed on powder coated steel pipe of 1010 mm height

Weight 1760 Gms. (Approx.)

Model No : AMR 148

ABS round body fitted with 2 Nos 100 mm or 65 mm dia highly reflective reflectors made out of PMMA and mounted on MS pipe of 50 duly powder coated, anti rust and anti theft steel net.

Available in Red, White or yellow white combination.

Weight : 765 Gms. (Approx.)

Model No. : AMR 149

ABS round body fitted with 2nos. of 100mm Dia highly reflective reflectors made of PMMA material mounted on powder coated rectangular steel pipe having size 1" X 3" X 24"

Available colour are Red, White and Yellow.

Model No. : AMR 150

ABS Rectangular body fitted with 2 nos. of 105 X 85 mm size, highly reflective reflectors made of PMMA material mounted on powder coated rectangular steel pipe having size 1" X 3" X 24"

Available colour are Red, White and Yellow.

Delineators

A.M.R. Flexwel Delineators make the dangerous curves, central verges, islands etc more visible to motorists to night and in daytime.

Made of flexible material, restores back to their erect posture even after minor hits. Fitted with 100 mm PMMA reflector, emits excellent reflection during night time.

They can also be fitted with bi directional reflectors.

The reflectors are available in Amber, White or Red colour.

Flap Delineators

Flap Delineators are ideal to separate bus bay, side skip road etc. Its unique design and properties of plastic helps it to maintain its shape and sturdiness even after several hits by vehicles.

Reflective tape on both sides of flap and two reflectors on both sides of base makes it clearly visible from a safe distance.

Designed to be used as a low profile lane divider / channeliser where more obtrusive products are not acceptable.

The delineator provides clear visible guidance in all weather conditions and help to ensure driver safety.

With high quality LED flashing light of this solar delineator proves more receptive to eyes and is visible from a safe distance.

Long lasting, easy to mount makes it user friendly and economical.

Reflectors are skilfully designed to give the maximum reflection and enhance visibility of vehicles during night or bad light conditions.

The high reflection gives the drivers early warning.

The reflectors are fixed to the base plate using ultrasonic welding method which protects the inner reflecting surface from dust, water and humidity giving them sustained life.

They never get discoloured because of the UV stabiliser used in their making.

Available in various sizes, these reflectors can be used on either side of all types of vehicles, road barriers and roadsides etc.

Guard Rail reflectors with metal base is used on the side of crash barrier along the highway.

Reflectors can also be fitted on both sides of the metal base.

It perfectly delineates the road direction and helps driver in the night driving.

Safety Apparels are designed to suit the needs of people working in sensitive and dangerous areas.

It increases the visibility of individual at night & in poor light condition because of the reflective material used.

The products meet world class quality standards due to the use of high quality standardised material.

It all begins with an idea. Maybe you want to launch a business. Maybe you want to turn a hobby into something more. Or maybe you have a creative project to share with the world. Whatever it is, the way you tell your story online can make all the difference.

It all begins with an idea. Maybe you want to launch a business. Maybe you want to turn a hobby into something more. Or maybe you have a creative project to share with the world. Whatever it is, the way you tell your story online can make all the difference.